In stage 1 , water travels through a 5 Micron Carbon Block Cartridge for removing volatile organic carbon compounds (VOC's, insecticides, pesticides and industrial solvents).
In stage 2, water travel through an Arsenic-Selective Resin Cartridge , designed specifically for reducing arsenic. Click here for product data
Multi Stage Cartridge:
In stage 3 and 8, water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.
In stages 4 and 5 , water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized. Read More About Eagle Redux Alloy
In stage 6 , water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.
In stages 7
, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water. Read More About GAC
Recommended flow rate: below 0.5 GPM.
Sits on the counter and easily connects to any kitchen faucet.
A diverter valve switches between filtered and unfiltered water.
CQE-CT-00140 CQE-CT-00148 - Dimensions: 15"L x 13"H x 5"W
- Recommended flow rate: below 0.5 GPM